Carb Carburettor Genuine

BMW R60 R75 R80 Mikuni VM34 carb kit


BMW R60 R75 R80 Mikuni VM34 carb kit
BMW R60 R75 R80 Mikuni VM34 carb kit
BMW R60 R75 R80 Mikuni VM34 carb kit
BMW R60 R75 R80 Mikuni VM34 carb kit
BMW R60 R75 R80 Mikuni VM34 carb kit

BMW R60 R75 R80 Mikuni VM34 carb kit    BMW R60 R75 R80 Mikuni VM34 carb kit
Going faster has never been so easy, say goodbye to worn old flooding stock carbs, hard starting, irregular idle, hesitations, and flatspots. The Dual Mikuni VM34 carburetor kit is easily fitted to your BMW R60, R75, R80 and the improvement is instant. This kit includes our silver anodized sleeves fitted to both ends of the Mikuni VM34 to match the original Bing carburetor dimensions. There is also a pair of inner throttle cable wires provided to replace the existing inner cable where you are required to solder the provided nipples to the base of the new wire. The supplied carb dimensions are 50mm inlet x 113mm front to back length x 44mm outlet.

Removal of a mm or two in length from the air filter plastic pipe may be required but usually not necessary (stock carb 110mm long). The most commonly suited jets for Australian fuel and conditions have been fitted as well as spares for fine tuning the top end at WOT. Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc.

Once tuned a VM Mikuni will not go out of tune for many years. At Mikunioz, for the last 30 plus years, we have been constantly checking and where necessary upgrading our jetting specs as fuel quality changes. Regular fuel in the USA is 85 octane or 91 in their premium brands which have numerous additives and blends added (basically smells and dry's like wood varnish) which results in a totally different jetting spec and product performance. You will instantly experience better throttle response, improved acceleration, increased horsepower and torque.

We have express options available for all our products also. Townsville to Brisbane 3 days, Townsville to North/Just South and West is usually 1-2 days. NSW ACT & VIC 4-6 days, TAS & SA 4-8 days, WA & NT 8-12 days. NSW ACT & VIC 2 days, TAS & SA 2-3 days, WA & NT 3-4 days.

This is entirely out of our control if this occurs. The international service we use is generally. THIS IS JUST PLAIN OLD COMMON SENSE.

Please also note that international parcels HAVE to be signed for and all parcels whether domestic or international are fully insured. THE FOLLOWING INFORMATION IS FINAL. THIS IS FINAL AND NO OTHER EXCEPTIONS! This item is in the category "Vehicle Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Air Intake & Fuel Delivery\Carburettors". The seller is "mikunioz" and is located in this country: AU.

This item can be shipped worldwide.
  1. Non-Domestic Product: No
  2. Manufacturer Part Number: BMWR80VM34
  3. Modified Item: No
  4. Custom Bundle: No
  5. Brand: Mikuni
  6. Type: Carburettor

BMW R60 R75 R80 Mikuni VM34 carb kit    BMW R60 R75 R80 Mikuni VM34 carb kit