Mikuni RS 36mm Carb Kit- Honda DOHC CB1100, Honda CB900, Honda CB750 1984 up

  

PLEASE NOTE: This kit comes with a set of RS36 Carburetors with 4 sleeves fitted to suit Honda CB models. This kit is for 1984 up Models, if you require 1979 to 83 kit it is a separate listing.

This Mikuni RS36 carburetor Kit is more suited for the Honda DOHC CB1100 but will be compatible for both 750's and 900's with worked engines. They will breathe a whole new lease of life into your machine with an up to 25% increase in power, whilst making it perform and operate as it should with no hesitations or flat spots. You will very quickly realize that the expense of a rebuild of your old worn OEM carbs can far exceed the cost of these new units and unfortunately as with many rebuilds now days you only have the option in many cases of gambling with very poor quality aftermarket parts.

Considering this and if intending to ride and enjoy your motorcycle it makes good sense to retire your OEM carbs into the cupboard and step up to a set of RS's. Before rushing in and ordering please firstly check your carb spacing and carbie sizes for compatibility. These are not suited for downdraft engines. This Mikuni kit comes in two fitment options- with the following carb centre to centre spacing's for direct fitment to Honda CB750. CB900 and CB1100 and will adapt to the stock air-box 55mm dia. Option 1- Suits 1979 thru 1983 models.

Outlet Diameter at the engine side is 44mm. A= 80mm (spacing centre to centre between carb 1 & 2).

B= 100mm (carb 2 & 3). C= 80mm (carb 3 & 4).

Option 2- Suits 1984 and later models. Outlet Diameter at the engine side is 42mm. If using the OEM air-box note that these carbs are 4mm shorter front to back than the OEM units. There is an oil line mod required for carb bowl clearance on some models shown in the picture gallery.

A= 72mm (spacing centre to centre between carb 1 & 2). B= 88mm (carb 2 & 3).

C= 72mm (carb 3 & 4). Pilot Jet: VM28/486-17.5, Needle: 9DZH1, Needle Jet: P-4 (568 Series), Main Jet: N100.604-120/130. Your stock throttle cables will not match to these carbs, where we have available in the RS accessories page either our road bike throttle and cable assembly (KRS-001) or a Quick action 1/4 turn throttle and cable kit (PPQA40K).

We have express options available for all our products also. Townsville to Brisbane 3 days, Townsville to North/Just South and West is usually 1-2 days. NSW ACT & VIC 4-6 days, TAS & SA 4-8 days, WA & NT 8-12 days.

NSW ACT & VIC 2 days, TAS & SA 2-3 days, WA & NT 3-4 days. This is entirely out of our control if this occurs.

THIS IS JUST PLAIN OLD COMMON SENSE. Please also note that international parcels HAVE to be signed for and all parcels whether domestic or international are fully insured. THE FOLLOWING INFORMATION IS FINAL. THIS IS FINAL AND NO OTHER EXCEPTIONS! This item is in the category "Vehicle Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Air Intake & Fuel Delivery\Carburettors". The seller is "mikunioz" and is located in this country: AU. This item can be shipped worldwide.

1. Manufacturer Part Number: RS36HONCB84UP
2. Modified Item: No
3. Machine Type: Dual Sport Motorcycle, Off-Road Motorcycle
4. Custom Bundle: No
5. Brand: Mikuni
6. Type: Carburettor
7. Manufacturer Warranty: 90 Day